With pinball making a big renewal throughout the country, Gentle Giant wishes to make certain that these classic, gorgeous devices remain damage-free while being carried. Oh, and we want individuals moving them to be safe, too.
Initially look, pinball makers can appear intimidating to move because of their weight, fragility, and size. The good news is, our skilled Giants have a few tricks up their sleeves to guarantee your pinball is moved with ease.
Folding Down the Headbox
The bulk of modern-day pinballs (made in the last 20 years or so) have a hinge system which enables the headbox to be folded down. Early pinball devices had their headboxes bolted on, utilizing either 2 or 4 bolts. All Electro-Mechanical pinballs use this system, along with the early Solid State devices.
Later on makers have hinges and utilize a latching system to keep the headbox upright. There may also be 2 bolts inside as included security, in case the lock is broken or accidentally un-latched.
For Electro-Mechanical pinball machines, you need to eliminate the headbox rear gain access to panel to get to the bolts and plugs within. Generally this panel has a lock on it to keep it in place, but in time the key may have been lost. On a regular basis, there is a screw keeping this panel in location.
Once inside, remove the bolts and unplug the large ports that have circuitry decreasing into the maker. You might wish to label these connectors to put them back in the right spot, but they must be various sizes, making it tough to plug back improperly.
You can now get rid of the headbox completely, or fold the headbox down onto the playfield glass. Make sure you use some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will help keep the back glass in place.
Early Solid State Pinballs
For early Solid State Pinballs, you will require to eliminate the back glass. There is a lock situated on the headbox in one of three locations: the left-hand side at the top, right-hand side at the top or on top of the headbox in the.
Once unlocked, remove the back glass by lifting it up using the lift channel (at the bottom of the glass), and after that pull it out from the bottom.
Then, open up the back box lamp panel by raising the lock situated on either the left-hand side or right-hand side. The panel can now swing out to you, and offer you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs need you to raise the light panel in order to swing it open.
Now that you are within, you can get rid of the bolts, and any plugs that have wires decreasing into the maker. You might wish to label these plugs to put them back in the right spot. You may not need to remove the plugs, as the wiring ought to be long enough to allow the headbox to be folded down.
At this point, you can lock up the lamp panel and replace the back glass.
Modern Solid State Pinballs
For Data East, Sega, and Stern Modern pinballs, there is a turnable latch system located at the back of the headbox. Using the supplied key, turn the latch 90 ° counter-clockwise.
For Williams, Bally, and Gottlieb, you can easily unlatch the back box at the back of the machine. This is a simple setup and requires no tools.
If you can now fold down the head box onto the cabinet, you're done. Make sure you use some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in place.
You need to get inside if you can not fold the head box down. There is a lock located at the top of the back glass in the. Utilize the provided secret to unlock, and get rid of the back glass by raising it up from the bottom, then pulling it out from the bottom.
Next, you will require to get rid of the display screen panel. (Some more recent Williams and Bally pinballs do not have a different amp panel, it is part of the back glass panel. And later on Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).
Eliminate the two bolts, put the back box back together, and fold down the head box onto the cabinet. Ensure you use some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it Check This Out will also help keep the back glass in location.
Getting rid of the Legs.
Pinball Maker legs are kept in location by 8 bolts. They will be either 5/8 inch or 9/16 inch heads. The contemporary pinballs have captive nuts or threaded plates inside for the bolts to screw into. These bolts can be eliminated, and the legs will come off.
However these threaded plates and captive nuts can be harmed, and the usage of additional nuts may have been required. If this holds true, you will have to open up the front door of the pinball, slide out the playfield glass, and raise the playfield.
With the front door (coin door) open, move the lock down bar latch throughout and get rid of the lock down bar. Then move out the playfield glass, and put in a safe location. Next, raise the playfield by placing your hand where the ball drains pipes, and raise the playfield up.
You must now have access to any nuts that may have been used. Once any nuts have been gotten rid of, change the playfield glass and lock down bar, and lock the front door.
Make certain to mark or keep in mind which legs are for the front and back, as they will be adjusted differently to suit.
Filling the Pinball.
You are now all set to transfer your pinball device. Before you load it, make sure you get rid of the pinballs so they do not bounce around throughout transport.
If you are moving the pinball using a van or SUV, it may be easier to get rid of the legs simply prior to packing the machine. Get a good friend to have and help one of you supporting the pinball, while the other removes the front legs.
Make certain you strap the pinball in, as you do not desire it moving if you have to stop suddenly!
For Electro-Mechanical pinball machines, you require to eliminate the headbox rear access panel to gain access to the bolts and plugs within. (Some more recent Williams and Bally pinballs do not have a separate amp panel, it is part of the back glass panel. And later Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).
If you are moving the pinball utilizing a van or SUV, it may be easier to get rid of the legs simply prior to packing the machine. Get a pal to have and help one of you supporting the pinball, while the other gets rid of the front legs.